Honda CBR 600RR Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
346 Posts
You don't have to remove the upper - it's possible to remove & install front turn signals without messing with the upper fairing.
 

·
Registered
Joined
·
5,537 Posts
Either way, it's a pain in the asssssssssssssssssss.....
 

·
Registered
Joined
·
115 Posts
Rayzorman1 said:
Either way, it's a pain in the asssssssssssssssssss.....

Yes it does and i gotta do it in the next few days for the Bargy school. I'm REALLY not lookin forward to takeing these off.
 

·
Registered
Joined
·
950 Posts
I'm looking into flush mounts, so I'll be removing everything soon enough...just removed the aftermarket exhaust and installed the stock back on my bike the other day and let me tell ya...that is a bitch and a half...
 

·
Registered
Joined
·
33 Posts
I just installed the new comp werks led flushmounts on my 06. I took the 3 bolts off each side and the mirrors, 2 plastic screws on the inside (both sides) and was able to pull the upper out one side at a time and remove the old and install the new. It was not hard at all and only took about 1/2 hour total. Will try and post pics of the new signals tommorow.
 
1 - 9 of 9 Posts
Top