Honda CBR 600RR Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
Well after searching forever to try and find what code 16 was on my bike and most trouble codes posts I found not listing it, I got a manual and this is what it says. Figured I'd post it to try to save some people a little time

1 Blink: MAP sensor circuit malfunction
-Operates normally

2 Blinks: MAP sensor performance problem
- Operates normally

7 Blinks: ECT sensor circuit malfunction
-Hard start at low temp

8 Blinks: TP sensor circuit malfunction
-Poor performance when moving throttle quickly

9 Blinks: IAT sensor malfunction
-Operates normally

11 Blinks: Vehicle speed sensor circuit malfunction
-Operates normally

12 Blinks: No. 1 Primary injector circuit malfunction
- Does not start

13 Blinks: No. 2 Primary injector circuit malfunction
-Does not start

14 Blinks: No. 3 Primary injector circuit malfunction
-Does not start

15 Blinks: No. 4 Primary injector circuit malfunction
-Does not start

16 Blinks: No. 1 Secondary injector circuit malfunction
-Does not start

17 Blinks: No. 2 Secondary injector circuit malfunction
-Does not start

18 Blinks: Cam pulse generator, no signal
-Does not start

19 Blinks: Ignition pulse generator, no signal
-Does not start

21 Blinks: No. 1 O2 sensor circuit malfunction (California type only)
-Operates normally

22 Blinks: No. 2 O2 sensor circuit malfunction (California type only)
-Operates normally

23 Blinks: No. 1 O2 sensor heater malfunction (California type only)
-Operates normally

24 Blinks: No. 2 O2 sensor heater malfunction (California type only)
-Operates normally

33 Blinks: E2-PROM in ECM malfunction
-Operates normally
-Does not hold self diagnosis data

48 Blinks: No. 3 Secondary injector circuit malfunction
-Does not start

49 Blinks: No. 4 Secondary injector circuit malfunction
-Does not start
 
1 - 1 of 1 Posts
Top