[dreze1]

Anyone know what type of connector Honda uses on the turn signal wires? The little two pin connector is what I am referring to. Or if you know where to get them, that would be even better. I assume its some standard connector.

I was installing my Tripage LED passenger pegs tonight and realized that if I could just splice a connector onto the peg wires, then I could have a snap in installation just like the factory turn signals. I guess my simple option is to cut the connector off the stock signal, but I'd like to keep those intact for now in case of any problems with the cops about legality of such mods.

The other option is to stick the wires in the back side of the connector and make sure its all taped up well.

 

[99SH]

Lockhart philips sells these for cheap. Do a search on the web...

 

[YZ3]

All auto manufacturer's make their own connectors like that so they're sort of proprietary. You can probably get them from the dealer or you can just cut them and solder the wires togeather and put elec tape or heat shrink around the wires.

 

[99SH]

Here's the LP catalog, scroll to page 198, its at the very bottom.

http://www.teamprivateer.com/33-Lightworks.pdf

Call http://www.ridegear.com, they sell them for $5 + shipping for a pair. You gotta call and provide them the part # to order. I got mine from them.

You can't get the connectors seperate from the dealer unless you buy the entire turnsignal housing.

 

[DenBoe]

i just made my own connectors from parts at a hardware store. honda style or not, they work fine.

 

[alaska cajun]

i just made my own connectors from parts at a hardware store. honda style or not, they work fine.

I like the way you think. :beer:

 

[Tules]

Here's the LP catalog, scroll to page 198, its at the very bottom.

http://www.teamprivateer.com/33-Lightworks.pdf

Call http://www.ridegear.com, they sell them for $5 + shipping for a pair. You gotta call and provide them the part # to order. I got mine from them.

You can't get the connectors seperate from the dealer unless you buy the entire turnsignal housing.

How do you know if the signal is single or dual filament?? heres what i want:

 

[tripage]

Single has two wires
Double has three wires..