Honda CBR 600RR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
Hey all,

Ive thrown in a US ecu to by pass the hiss system on the bike, i have finally got the bike started and the fuel pump priming connecting the extra grey wire onto the white connector plug and conneecting it directly to a external 12v source following a wiring diagram and watching a youtube video. Thou i need to know where i can tap into for a 12v power when I have the bike switched on so the pump runs too. Does anyone know where i can tap into to get 12v power with power switched on
 

Attachments

·
Registered
Joined
·
28 Posts
Discussion Starter #3
Sorted out, incase anyone searches this thread, that pin added needs 9v so you will need to attach a zener diode and plug from any 12v source on the bike,
 

·
Administrator
Joined
·
13,137 Posts
That depends on the year model of the ECU you've used. The zener is only needed on the 03-04 ECU.
 

·
Registered
Joined
·
28 Posts
Discussion Starter #5
Hey Nico,

I made a youtube video on how to work a non hiss ECU on a australian harness and how to get it working

 

·
Administrator
Joined
·
13,137 Posts
Good job mate, quick tip though - stop using your kill switch or it will fail. Really common fault with them.
 
1 - 6 of 6 Posts
Top