Honda CBR 600RR Forum banner

1 - 12 of 12 Posts

·
06/2016 BOTM Winner 07/2015 BOTM Winner
Joined
·
2,862 Posts
Discussion Starter #1
Trying to find the source of a weird buzzing noise on my bike at about 5,000 RPM's. at a friends as we took the clutch cover off to see if anything seemed odd in this area. This chain pictures it pretty lose so what dkes this go to and should it have any slack in it?

 

·
Registered
Joined
·
7,442 Posts
I think it's the oil pump chain, not sure about any slack though. I'll check the service manual quick
 

·
Registered
Joined
·
7,442 Posts
the manual doesn't say anything about slack in the chain.

Are you on a computer? If so I have a present for you
 

·
06/2016 BOTM Winner 07/2015 BOTM Winner
Joined
·
2,862 Posts
Discussion Starter #5
I'm on my phone at the moment. We pulled the clutch basket off and everything seems good in there. So either this chain is to lose for what ever reason or my noise is coming from my Cain cam tensioner
 

·
Registered
Joined
·
2,483 Posts
I think that's the the chain cam and the tensioner aka cct is what went bad (not tightening the chain tight enough and that's what cause the buzzing/loose sound)) . Time for an ape I'd say (but I might be wrong).
 

·
Registered
Joined
·
2,374 Posts
"Buzzing" sound around 5k rpm is typically the cct, especially on bikes of our year.
 

·
06/2016 BOTM Winner 07/2015 BOTM Winner
Joined
·
2,862 Posts
Discussion Starter #8

·
BOTY 2014 Winner
Joined
·
4,903 Posts
100%

It only rattles as the revs drop and the slack rattles on the off tensioner side. It won't rattle much when loaded
 

·
06/2016 BOTM Winner 07/2015 BOTM Winner
Joined
·
2,862 Posts
Discussion Starter #10
100%

It only rattles as the revs drop and the slack rattles on the off tensioner side. It won't rattle much when loaded
when I ride it rattles at about 5-6000 RPM's, above that I dont tend to notice it, below 5,000 it never does it. Usually stops doing it when I pull the clutch in.


So what exactly is the issue what causes it and how is it fixed? Price? Parts?
 

·
06/2016 BOTM Winner 07/2015 BOTM Winner
Joined
·
2,862 Posts
Discussion Starter #12
I found Nutty's video on how to replace it on yotube, looks really easy. Only $51.00 and the gasket as well. Will be nice to get this noise taken care of.
 
1 - 12 of 12 Posts
Top