Honda CBR 600RR Forum banner

1 - 13 of 13 Posts

·
Super Moderator
Joined
·
1,943 Posts
Bank Angle Sensor. When I replaced my fairings, put this on upside down. Had to redo it so bike would start. :p
 

·
BOTY 2014 Winner
Joined
·
4,811 Posts
I originally suspected pair valve, but you said the pump won't prime and bike won't start and that isn't consistent with the pair valve.

Why is it unplugged? Have you been working on the bike?
 

·
BOTM Winner 07/16
Joined
·
880 Posts
http://i.imgur.com/n7MBN.jpg

The black box (with the rounded bottom) with the 2 silver bolts on top of the ram air intake. That's the bank angle sensor; there is a wire behind it and it should connect to that connector on your hand.
 

·
Registered
Joined
·
8 Posts
Discussion Starter #12
Long story short I laid it over and left it out the night it happened and my dog chewed a lot of wires, so I had to replace the wiring harness. Hooked it all up and didn't know where this went. It doesn't seem like it will stretch all the way up to the headlights? any tips? and also the Orange ended connector on the right side. where does it go?
 
1 - 13 of 13 Posts
Top