WTB Rear end stuff - 600RR.net
03 to 06 RR parts Looking for Oem or after market parts for your 03 to 06 RR only post your thread here & best of luck

Reply
 
LinkBack Thread Tools
post #1 of 39 (permalink) Old 11-26-2012, 04:07 PM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
WTB Rear end stuff

I got rear ended pretty good on the expressway a few months ago (non-licensed, uninsured, cock), I am looking to rebuild her now that I am healthy again.

So far I am just doing the major stuff, and the last thing I'll do is a set of plastics.


Bike: 03 CBR 600rr

So I need:

03-06 Upper Fairing Stay
03-04 Swing Arm ---- Have
03-04 Wheel/Rotor ---- One of a 2011
03-04 Sub Frame ---- Have
Rear Master Cylinder (Brakes) ---- Have
Brake Lines ---- Have
Tail Light (stock) ---- Have
Slip On (I have a full Arata Ti exhaust, the slip on was the only thing destroyed, I'll have to get inlet size needed)
Rear Set (right side for sure)
Levers (Brake for sure)
Throttle Tube (the plastic and guide tubes too)
Front Turn Indicators (anything but stock)
Windshield
Rear Axle Bolt <-NEED


I think that is it for now.


Pics of accident:
GEAR UP!







Finished fixing the wiring! I think.



Thanks for any help!

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...

Last edited by CorneliusRox; 12-26-2012 at 02:13 AM.
CorneliusRox is offline  
Sponsored Links
Advertisement
 
post #2 of 39 (permalink) Old 11-27-2012, 04:15 AM
Pocketbike Racer
 
49erRider's Avatar
 
Join Date: Sep 2007
Location: Fort Mill SC
Posts: 250
Thanks: 8
Thanked 2 Times in 2 Posts
Feedback Score: 3 reviews
I've got a windscreen and levers I can send.

$30 shipped???
49erRider is offline  
post #3 of 39 (permalink) Old 11-27-2012, 05:59 AM
BOTM Winner 05/15
 
cbr6racr's Avatar
 
Join Date: Nov 2008
Location: Brighton, MI
Posts: 9,996
Thanks: 514
Thanked 830 Times in 703 Posts
Feedback Score: 28 reviews
I have a new integrated tail light coming this week, so I will have an extra tail light. Not sure which one I'll use yet.

I also have a clear stock windscreen. Could use a good polishing to get some light scratches out from normal use. If you don't grab the one above, let me know.

Sent from my ADR6300 using Motorcycle.com App

-Chad

"Logically, any motorcyclist can do 60* of lean. The trick is coming back up again." - Neal Spalding
cbr6racr is offline  
 
post #4 of 39 (permalink) Old 11-27-2012, 02:18 PM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
Quote:
Originally Posted by 49erRider View Post
I've got a windscreen and levers I can send.

$30 shipped???
Sounds good. What style windscreen? and just stock aluminum levers correct?

Quote:
Originally Posted by cbr6racr View Post
I have a new integrated tail light coming this week, so I will have an extra tail light. Not sure which one I'll use yet.

I also have a clear stock windscreen. Could use a good polishing to get some light scratches out from normal use. If you don't grab the one above, let me know.

Sent from my ADR6300 using Motorcycle.com App
I am not really a fan of the integrated ones so let me know if you have the stock tail for a good price.

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #5 of 39 (permalink) Old 11-27-2012, 03:02 PM
Pocketbike Racer
 
Rappin23's Avatar
 
Join Date: Nov 2010
Location: Bay Area
Posts: 444
Thanks: 15
Thanked 41 Times in 41 Posts
Feedback Score: 4 reviews
I have my stock tail light off my 03.... pm me and we can work something out

Rappin23 is offline  
post #6 of 39 (permalink) Old 11-28-2012, 07:44 AM
BOTM Winner 05/15
 
cbr6racr's Avatar
 
Join Date: Nov 2008
Location: Brighton, MI
Posts: 9,996
Thanks: 514
Thanked 830 Times in 703 Posts
Feedback Score: 28 reviews
Quote:
Originally Posted by CorneliusRox View Post
I am not really a fan of the integrated ones so let me know if you have the stock tail for a good price.
How does $free.99 sound? Is that a good enough price for you? I got a good deal on my IT, so consider it an early Christmas present. Besides, looks like you have bigger expenses to worry about.

-Chad

"Logically, any motorcyclist can do 60* of lean. The trick is coming back up again." - Neal Spalding

Last edited by cbr6racr; 12-11-2012 at 08:21 AM.
cbr6racr is offline  
post #7 of 39 (permalink) Old 11-28-2012, 10:21 AM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
Quote:
Originally Posted by cbr6racr View Post
How does $free.99 sound? Is that a good enough price for you? I got a good deal on my IT, so consider it an early Christmas present. Besides, looks like you have biggest expenses to worry about.
Hell yeah that sounds good! ha ha

Sending PM now.

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #8 of 39 (permalink) Old 11-28-2012, 10:31 PM
Knee Dragger
 
Join Date: Apr 2009
Location: cleveland ohio
Posts: 242
Thanks: 0
Thanked 2 Times in 2 Posts
Feedback Score: 16 reviews
hey i have the following items-
03-06 Upper Fairing Stay
Rear Master Cylinder (Brakes)
Throttle Tube (the plastic and guide tubes too)
complete rim with tire (06 but they are the same as 03)

pm me offers
ktmryan53 is offline  
post #9 of 39 (permalink) Old 11-29-2012, 06:33 AM
Pocketbike Racer
 
49erRider's Avatar
 
Join Date: Sep 2007
Location: Fort Mill SC
Posts: 250
Thanks: 8
Thanked 2 Times in 2 Posts
Feedback Score: 3 reviews
Sorry man forgot to check this thread. I'll PM you pictures of everything when I get home from work this evening.
49erRider is offline  
post #10 of 39 (permalink) Old 11-29-2012, 10:55 AM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
Quote:
Originally Posted by ktmryan53 View Post
hey i have the following items-
03-06 Upper Fairing Stay
Rear Master Cylinder (Brakes)
Throttle Tube (the plastic and guide tubes too)
complete rim with tire (06 but they are the same as 03)

pm me offers
PMed

Quote:
Originally Posted by 49erRider View Post
Sorry man forgot to check this thread. I'll PM you pictures of everything when I get home from work this evening.
And Thanks!

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #11 of 39 (permalink) Old 11-29-2012, 11:09 AM
 
tripage's Avatar
 
Join Date: Jun 2004
Location: orlando
Posts: 14,330
Thanks: 598
Thanked 728 Times in 591 Posts
Feedback Score: 91 reviews
I have the rear rim. It's Monster green powder coated. We can change this if you want.




http://tripageled.com/store/
Owner
Tristan Page
[email protected]
[email protected]
Dual low / Dual High beam led headlights. OEM appearance
http://tripageled.com/store/index.ph...product_id=236
Integrated Gear Indicator installed inside your cluster
http://tripageled.com/store/index.ph...product_id=116
tripage is offline  
post #12 of 39 (permalink) Old 11-29-2012, 11:29 AM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
Quote:
Originally Posted by tripage View Post
I have the rear rim. It's Monster green powder coated. We can change this if you want.
I'll have one off of a 2011 with a brand new PP2CT and rotor on either Sunday or Monday, but I am not 100% sure if it will fit. If it doesnt, I'll be looking for more options, so thanks and I might get back to you.

Pics of the green just for fun?

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #13 of 39 (permalink) Old 11-29-2012, 11:40 AM
 
tripage's Avatar
 
Join Date: Jun 2004
Location: orlando
Posts: 14,330
Thanks: 598
Thanked 728 Times in 591 Posts
Feedback Score: 91 reviews




http://tripageled.com/store/
Owner
Tristan Page
[email protected]
[email protected]
Dual low / Dual High beam led headlights. OEM appearance
http://tripageled.com/store/index.ph...product_id=236
Integrated Gear Indicator installed inside your cluster
http://tripageled.com/store/index.ph...product_id=116
tripage is offline  
post #14 of 39 (permalink) Old 11-29-2012, 11:50 AM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
That thing is sweet! Did you have rockstar plastics on the bike? I dont think that would match the scheme I am probably going to go with, it does remind me of those Ken Block videos though

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #15 of 39 (permalink) Old 11-29-2012, 11:55 AM
 
tripage's Avatar
 
Join Date: Jun 2004
Location: orlando
Posts: 14,330
Thanks: 598
Thanked 728 Times in 591 Posts
Feedback Score: 91 reviews
We had a z1000 come in for a rockstar theme. Black/green. We had an extra rim so figured we could see how the color matched.
http://www.facebook.com/media/set/?s...9434668&type=3




http://tripageled.com/store/
Owner
Tristan Page
[email protected]
[email protected]
Dual low / Dual High beam led headlights. OEM appearance
http://tripageled.com/store/index.ph...product_id=236
Integrated Gear Indicator installed inside your cluster
http://tripageled.com/store/index.ph...product_id=116
tripage is offline  
post #16 of 39 (permalink) Old 11-29-2012, 12:10 PM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
I like those Z1000's, got to ride one at the ride and drive. Good work on it!

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
The Following User Says Thank You to CorneliusRox For This Useful Post:
tripage (12-08-2012)
post #17 of 39 (permalink) Old 12-07-2012, 06:05 PM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
Look what I got! $200 for a brand new 2CT, new wheel, sprocket (wont be using), rotor, and a slip-on (it is only 2"ID and I need 2.5" though...).

Chad hooked me up with a tail light! Thanks again.

And STR8_Lurkin is shipping me a swingarm, brake lines, rear caliper and master, subframe, and shock/spring. Should be a fun Christmas break and if Denver stays this warm, I might take her out for a test drive.


Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #18 of 39 (permalink) Old 12-07-2012, 09:33 PM
BOTM Winner 05/15
 
cbr6racr's Avatar
 
Join Date: Nov 2008
Location: Brighton, MI
Posts: 9,996
Thanks: 514
Thanked 830 Times in 703 Posts
Feedback Score: 28 reviews
No problem! Good find on that rim/tire combo.

Sent from my ADR6300 using Motorcycle.com App

-Chad

"Logically, any motorcyclist can do 60* of lean. The trick is coming back up again." - Neal Spalding
cbr6racr is offline  
post #19 of 39 (permalink) Old 12-10-2012, 01:31 PM
Pocketbike Racer
 
moto x's Avatar
 
Join Date: Jan 2010
Location: Saginaw
Posts: 365
Thanks: 2
Thanked 5 Times in 5 Posts
Feedback Score: 2 reviews
If you need any of this stuff lmk https://www.600rr.net/vb/showthread.php?t=294299

moto x is offline  
post #20 of 39 (permalink) Old 12-10-2012, 08:29 PM
Training Wheel Hero
 
Join Date: Jun 2012
Location: Canada EH!
Posts: 19
Thanks: 4
Thanked 12 Times in 12 Posts
Feedback Score: 2 reviews
i have the fairing stay, the rear master cylinder, the brake and clutch lever and the throttle tube if you still need them
flamboyant is offline  
post #21 of 39 (permalink) Old 03-28-2013, 10:36 AM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
I cant make the rear wheel work, the wheel axle wouldnt match up with my rear swing arm.

So I need a rear wheel off an 03-04 (is an 05-06 the same thing?), and the axle bolt for an 03-04.

Let me know if anyone has anything. I am itching to get my bike back on the road!

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #22 of 39 (permalink) Old 03-28-2013, 03:53 PM
Moto GP Racer
 
Bridge_Jumper's Avatar
 
Join Date: May 2012
Location: Land O' Cheese
Posts: 7,440
Thanks: 370
Thanked 1,167 Times in 990 Posts
Feedback Score: 5 reviews
the rear you have should work according to this
https://www.600rr.net/vb/showthread.php?t=242814

are you sure you have everything lined up correctly?

2006 Honda CBR600RR Black Tribal Edition
2W1R - IceTitan
Bridge_Jumper is offline  
post #23 of 39 (permalink) Old 03-28-2013, 05:35 PM
BOTM Winner 05/15
 
cbr6racr's Avatar
 
Join Date: Nov 2008
Location: Brighton, MI
Posts: 9,996
Thanks: 514
Thanked 830 Times in 703 Posts
Feedback Score: 28 reviews
I think I have an axle you can have. It just needs a very good cleaning.

Sent from my ADR6300 using Motorcycle.com App

-Chad

"Logically, any motorcyclist can do 60* of lean. The trick is coming back up again." - Neal Spalding
cbr6racr is offline  
post #24 of 39 (permalink) Old 04-02-2013, 08:10 PM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
Quote:
Originally Posted by Bridge_Jumper View Post
the rear you have should work according to this
https://www.600rr.net/vb/showthread.php?t=242814

are you sure you have everything lined up correctly?
It definitely has a smaller sized hole than my original one. Honestly, I dont know what it came off of because I am pretty sure it isnt a CBR at this point. I got the wheel, tire (brand new pure 2ct), sprocket, rotor, and a slipon (was .5" too small so I'm building one) for $200 locally.



Quote:
Originally Posted by cbr6racr View Post
I think I have an axle you can have. It just needs a very good cleaning.

Sent from my ADR6300 using Motorcycle.com App
I would definitely appreciate that! I'll PM you now about it.





Also, I got everything wired up, and it seems as though the taillight I got doesnt work. I tried hooking it up to a 12v power supply and testing it, no dice.

And my gauge cluster screen doesnt work, but the brights and blinkers work on it. So I am going to take it apart probably this weekend, but if I cant figure it out, I'll be needing one of those too.

Oh and I might be picking up a rear wheel off an 03-04, but if that falls through, if anyone has one, let me know.

Thanks again guys!


Here is the progress:
Swing Arm and rear suspension slid on PERFECT! Sub frame went on super smooth too! I was pumped to confirm that the frame wasnt bent at all (even though I had checked it like 20 different ways already).






I cant find a before picture of my slipon, but ti was bent and twisted. I couldnt get the body straight enough for my liking, but I bent the ends back straight, and then I took the center grid tube and cut it long ways, hammered it flat, bent it back, and welded it back together. That was not fun to TIG with how thin and dirty it was (dirty was my fault). I just got a sheet of stainless that I am going to cut, bend, and weld to make the body again. I'll get pics after it's done.

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #25 of 39 (permalink) Old 04-02-2013, 08:15 PM
Moto GP Racer
 
Bridge_Jumper's Avatar
 
Join Date: May 2012
Location: Land O' Cheese
Posts: 7,440
Thanks: 370
Thanked 1,167 Times in 990 Posts
Feedback Score: 5 reviews
yeah, that's not a honda wheel. Look on the spokes and it should say what flavor bike it's off of

2006 Honda CBR600RR Black Tribal Edition
2W1R - IceTitan
Bridge_Jumper is offline  
post #26 of 39 (permalink) Old 04-03-2013, 03:08 AM
Knee Dragger
 
Join Date: Mar 2013
Posts: 142
Thanks: 4
Thanked 3 Times in 3 Posts
Feedback Score: 2 reviews
ok I want to say.. wholy crap!! The bike looked messed! I hope you are recovered and faired better than it did!!!

I don't know what you are still after but here is what i have:

05 CBR 600RR
- rear rim complete, cush, sprocket, brake disc, good bearings, new tire - $150
-OEM bar ends $10 each
-OEM clear screen $35

03 CBR RR - dark smoke windscreen - $25
aftermarket stuff..
LED shorty or flush signals $20/pair
bar ends $10/pair
spools $10/pair


I am open to wheel and deal on multiple items
crev-dog is offline  
post #27 of 39 (permalink) Old 04-03-2013, 10:10 AM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
Quote:
Originally Posted by crev-dog View Post
ok I want to say.. wholy crap!! The bike looked messed! I hope you are recovered and faired better than it did!!!

I don't know what you are still after but here is what i have:

05 CBR 600RR
- rear rim complete, cush, sprocket, brake disc, good bearings, new tire - $150
-OEM bar ends $10 each
-OEM clear screen $35

03 CBR RR - dark smoke windscreen - $25
aftermarket stuff..
LED shorty or flush signals $20/pair
bar ends $10/pair
spools $10/pair


I am open to wheel and deal on multiple items
Well I would like to start off by saying thanks! ha ha Yeah I made a full recovery. Probably 95% right now because my ankle is taking a long time with the ligaments healing. Broke my collar bone, my hip bone popped through my side, ankle was sprained bad, and a decent amount of rash on my lower half (where there wasnt leather). It took a while to get back on my feet, but I'm doing great now and WANT TO RIDE!

So if you could send me a picture of your wheel with tire. It looks like Bridge_Jumper confirmed that it would fit on my 03-04 swingarm (correct me if I'm wrong). I am very interested.

Then the smoked windscreen, flush mount signals, and spools I am also interested in.

My area is 80031, if you want to grab a couple of pictures and look up shipping, I'd like to make a deal.

Thanks again!

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #28 of 39 (permalink) Old 04-04-2013, 12:18 PM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews
What cant I edit my OP anymore?! LAME!

anyways, here is a link to the build thread. Different forum. Sorry about that.

My Build Thread

Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #29 of 39 (permalink) Old 04-22-2013, 11:37 PM Thread Starter
Knee Dragger
 
CorneliusRox's Avatar
 
Join Date: Apr 2009
Location: Minneapolis, MN
Posts: 213
Thanks: 2
Thanked 8 Times in 8 Posts
Feedback Score: 0 reviews



Corey - BSME
BCM, Full Arata Ti exhaust, PC3, etc...
CorneliusRox is offline  
post #30 of 39 (permalink) Old 04-24-2013, 02:27 AM
Knee Dragger
 
Join Date: Mar 2013
Posts: 142
Thanks: 4
Thanked 3 Times in 3 Posts
Feedback Score: 2 reviews
my rim and tire looks good on your bike,, now all you need is a subframe to ditch that Euro streetfighter look :)

Thanks for the sale!

I just acquired another complete rear rim if you know anyone thats in need?
crev-dog is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the 600RR.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome