Join Date: Jun 2010
Location: Bay Area
Thanked 228 Times in 200 Posts
Feedback Score: 9 reviews
put it all back together and squeeze the brakes that will make the pads pretty even,
make sure you mounted the rotors back on the wheel correctly,
then put the wheel in, make sure your calipers are off at this point, put the calipers on,
Originally Posted by Sete15 View Post
Yes, you DO need to torque up in a very specific order to keep the axle from binding which can happen, I've seen it before..... If you don't know how to do something properly-- don't pretend like you do and steer others in the wrong direction. That way you do everyone a favor. Here is the official Honda factory technician's procedure:
-Apply a thin layer of grease to the front of the axle rod & install axle from LEFT side of bike (your right side as you face the front of the bike)
-Torque axle bolt to the specified torque
-Tighten the right axle pinch bolts to specified torque.
-Install both brake calipers and tighten mounting bolts
-Check front brake operation by spinning wheel and applying brake pressure
-Lower the front of the bike, with the front brake applied, pump the fork up and down several times to seat the axle.
-Tighten the left axle holder bolts to the specified torque.