2003 600RR Turn Signals not working - 600RR.net
Troubleshooting Having trouble with your bike? Common know issues or trobuleshooting questions here.

 
LinkBack Thread Tools
post #1 of 8 (permalink) Old 04-12-2014, 06:11 AM Thread Starter
AMA Supersport Racer
 
Tim600RR's Avatar
 
Join Date: May 2007
Location: Rochester, NY
Posts: 572
Images: 16
Thanks: 31
Thanked 8 Times in 7 Posts
Feedback Score: 1 reviews
2003 600RR Turn Signals not working

So I purchased a new set of repsol plastics and have gotten the upper mounted on the bike. I wanted to do a check of all the electrical before finishing the assembly and found that my turn signals no longer work.
I did all the usual checks and found all wires connected, and the fuse is good.
What's weird about this to me is that every thing electrically on the bike works except the turn signals.
I am not even getting the indicator light on the gauge cluster. I tested each signal light and found they all work. I tested the turn signal switch and verified that's working properly.

I am racking my brain here. What else could it be??!?!?!



2003 600RR - 34,100 Miles
Tim600RR is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 04-12-2014, 04:45 PM
AMA Supersport Racer
 
Join Date: Jun 2013
Posts: 860
Thanks: 24
Thanked 90 Times in 85 Posts
Feedback Score: 0 reviews
broken/disconnected relay? iirc it is located in the gauge cluster so you may have knocked the plug on the back of the gauges slightly and it is not making contact.

Last edited by youngy; 04-12-2014 at 04:49 PM.
youngy is offline  
post #3 of 8 (permalink) Old 04-12-2014, 05:45 PM
Moto GP Racer
 
skoobie snacks's Avatar
 
Join Date: Sep 2011
Location: Bay Area California
Posts: 2,959
Thanks: 183
Thanked 226 Times in 203 Posts
Feedback Score: 3 reviews
Also, trace the wires and make sure you haven't pinched through a wire while installing the new fairings.
skoobie snacks is offline  
 
post #4 of 8 (permalink) Old 04-12-2014, 06:22 PM
 
tripage's Avatar
 
Join Date: Jun 2004
Location: orlando
Posts: 14,330
Thanks: 598
Thanked 728 Times in 591 Posts
Feedback Score: 91 reviews
Did you meter the fuse or look at it? Check the running light power for the orange/blue plugs and see if it is still there. If it is then I would check the relay. Probably dead and you need an electronic one like stated above.




http://tripageled.com/store/
Owner
Tristan Page
[email protected]
[email protected]
Dual low / Dual High beam led headlights. OEM appearance
http://tripageled.com/store/index.ph...product_id=236
Integrated Gear Indicator installed inside your cluster
http://tripageled.com/store/index.ph...product_id=116
tripage is offline  
post #5 of 8 (permalink) Old 04-12-2014, 07:08 PM Thread Starter
AMA Supersport Racer
 
Tim600RR's Avatar
 
Join Date: May 2007
Location: Rochester, NY
Posts: 572
Images: 16
Thanks: 31
Thanked 8 Times in 7 Posts
Feedback Score: 1 reviews
Some good advice here, thanks guys.

I did have to muscle the upper fairing on pretty good to get it on the fairing stay. So maybe it is the connector. I just re-looked at the wiring schematic. I didn't know the relay was in the gauge cluster.
If it is bad, does that require I replace the gauge cluster assembly?



2003 600RR - 34,100 Miles
Tim600RR is offline  
post #6 of 8 (permalink) Old 04-13-2014, 06:39 AM
AMA Supersport Racer
 
Join Date: Jun 2013
Posts: 860
Thanks: 24
Thanked 90 Times in 85 Posts
Feedback Score: 0 reviews
the service manual says you have to replace the gauge cluster pcb if the relay has failed. there are tests in the manual in order to check it.
youngy is offline  
post #7 of 8 (permalink) Old 04-13-2014, 09:45 AM
 
tripage's Avatar
 
Join Date: Jun 2004
Location: orlando
Posts: 14,330
Thanks: 598
Thanked 728 Times in 591 Posts
Feedback Score: 91 reviews
You can get a flasher relay and wire it in to bypass the OEM one in the cluster.

https://www.600rr.net/vb/showthread.php?t=114102




http://tripageled.com/store/
Owner
Tristan Page
[email protected]
[email protected]
Dual low / Dual High beam led headlights. OEM appearance
http://tripageled.com/store/index.ph...product_id=236
Integrated Gear Indicator installed inside your cluster
http://tripageled.com/store/index.ph...product_id=116
tripage is offline  
The Following User Says Thank You to tripage For This Useful Post:
Tim600RR (04-13-2014)
post #8 of 8 (permalink) Old 04-13-2014, 11:57 AM Thread Starter
AMA Supersport Racer
 
Tim600RR's Avatar
 
Join Date: May 2007
Location: Rochester, NY
Posts: 572
Images: 16
Thanks: 31
Thanked 8 Times in 7 Posts
Feedback Score: 1 reviews
Tripage you are the man.

That's a much better option than replacing the whole cluster assy.



2003 600RR - 34,100 Miles
Tim600RR is offline  
The Following User Says Thank You to Tim600RR For This Useful Post:
tripage (04-13-2014)
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the 600RR.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome