Join Date: Apr 2006
Thanked 0 Times in 0 Posts
Feedback Score: 0 reviews
Dont think you need to go on an upward slope but your bike level on the ground should be fine.
From the Manual:
Remove the radiator cap, fill system with coolant up to the filler neck.
Remove radiator reserve tank cap and fill to the upper level line.
Bleed air from system as follows, 1. Shift the transmission into neutral. Start the engine and let it idle for 2-3 mins. 2. Snap the throttle three to four times to bleed air from the system. 3. Stop the engine and add coolant up to the proper level if necessary. Reinstall the radiator cap. 4. Check the level of coolant in the reserve tank and fill to the upper level if it is low. Install radiator reserve tank cap.